Power Supply |
DC24V,1.5A |
No. of Axis |
4 |
Encoder |
Nil |
Analog Output |
2-CH, 0-5V |
PWM Output |
2-CH |
General Input |
DC24V, 4-CH optical isolator |
General Output |
DC24V, 8-CH, 100mA each-CH |
Dedicated Input |
DC24V, 3-CH each axis (Limit+, Limit-, ORG) |
Pulse Max Freq. |
2MHz |
Pulse Output |
Pulse/Dir or CW/CCW |
Pulse Output Max Value |
±2147483647(231) |
Acc. Mode |
S-profile |
Arc (circular) Interpolation |
X and Y axis |
Micro-linear Segment Interpolation |
X, Y, Z and U axis |
OS |
Windows XP/7/8/8.1/10, both 32-bit and 64-bit |
Install driver of MD1017 inPC
It is not required to install the driver when the connection uses the Lan cable.
The step to install the driver when the connection uses the USB cable.
(a). Connect the controller and the PC by the USB cable.
(b). Switch on the 24V power supply to the controller.
(c). Windows detects the new hardware automatically.
(d). Install the driver manually, open the folder in
where the file "usb_dev_serial.inf" is.